EZ Sharp Carbide Turning Inserts provide maximum tool life and cutting precision with inserts to work well with our face mills and indexable end mills. Our Turning inserts handle a variety of materials with and our advanced coating makes them last and last.
EZ Sharp inserts provide outstanding results in Steels, Stainless Steels, Cast Iron and Heat-Resistant Super Alloys withstands difficult cutting conditions – varying depths of cut, weak and unstable setups, vibrations.
|
CATALOG NUMBER |
ISO DESIGNATION |
DIMENSIONS (INCH) |
CUTTING DATA (INCH) |
STEEL |
||||||
|
d |
l |
s |
r |
depth of cut, ap |
feed per rev, fn |
EP1105 |
EP1115 |
EP1225 |
||
|
SNMG 321-EQM |
SNMG 090304-QM |
3/8 |
.375 |
1/8 |
1/64 |
.016 - .141 |
.005 - .014 |
|
★ |
★ |
|
SNMG 322-EQM |
SNMG 090308-QM |
3/8 |
.375 |
1/8 |
1/32 |
.020 - .141 |
.006 - .016 |
|
★ |
★ |
|
SNMG 431-EQM |
SNMG 120404-QM |
1/2 |
.500 |
3/16 |
1/64 |
.016 - .187 |
.005 - .014 |
|
★ |
★ |
|
SNMG 432-EQM |
SNMG 120408-QM |
1/2 |
.500 |
3/16 |
1/32 |
.020 - .187 |
.006 - .016 |
★ |
★ |
★ |
|
SNMG 433-EQM |
SNMG 120412-QM |
1/2 |
.500 |
3/16 |
3/64 |
.031 - .187 |
.007 - .018 |
★ |
★ |
★ |
|
SNMG 434-EQM |
SNMG 120416-QM |
1/2 |
.500 |
3/16 |
1/16 |
.040 - .187 |
.008 - .020 |
|
|
★ |
|
SNMG 542-EQM |
SNMG 150608-QM |
5/8 |
.625 |
1/4 |
1/32 |
.020 - .219 |
.006 - .016 |
|
★ |
★ |
|
SNMG 543-EQM |
SNMG 150612-QM |
5/8 |
.625 |
1/4 |
3/64 |
.031 - .219 |
.007 - .018 |
★ |
★ |
★ |
|
SNMG 643-EQM |
SNMG 190612-QM |
3/4 |
.750 |
1/4 |
3/64 |
.031 - .266 |
.007 - .018 |
★ |
★ |
★ |
Coating by Material Class
P - Steel
CVD Coating high wear resistance
GP1105
GP1115
GP1225
GP1135
M - Stainless
CVD Coating with high wear resistance
GM1125
PVD Coating with high toughness
GS3115
GS3125
K - Cast Iron
CVD Coating high wear resistance
GK1115
GK1125
S - High Resistant Super Alloys
PVD Coating with high toughness
GS3115
Competitive Comparative Inserts
| Turning Chip breaker Comparison - Negative Rake Inserts | ||||||||
| Material / Application | EZ Sharp | Iscar | Kennametal | Kyocera | Mitsubishi | Sandvik | Walter | |
| P Steel |
Finishing | QF | NF, F3P | FP, FN, K | GP, PP, HQ, CQ, XQ | LP, SA, SY, SH | PF, QF, LC | FP5, NF3, NS6 |
| Medium | SV, ZQM | TF, GN, M3P | MP, MN, P, C, UN | PQ, PS, PG, CS, GS, PT, HS | MP, MA, MV, MH | PM, QM | MP3, MP5 | |
| Medium with Wiper | WMV | WG | MW | WE, WQ | MW | WM, WMX | NM | |
| Roughing | QR | NR, T3P, HTW | RP, RN | HT, GT, PH | RP, GH | PR | NM6, RP5, RP7, NM9 | |
| Heavy | QH | R3P | RM, RP, RH | PX, HX | HZ, HX, HV | PR, QR, HR | NRF, NR6, NR8, NRR | |
| M Stainless Steel |
Finishing | SF | VL, SF, NF, SM, F3M | FP, FN, FS, LF | MQ, GU | FH, SH, LM | MF | NF4, FM5 |
| Medium | LM, SM | TF, PP, M3M | MS, MP, UP, UN | MS, MU, HU, MQ | MM, MS, MA | MM, QM, SM | NM4, MM5 | |
| Roughing | LR | NM, R3M, M4, MW | RP | TK, ST | RM, RK, GH | MR | NR4, RM5 | |
| K Cast Iron |
Medium | UK, HK | GN | FN, UN | KQ, KG, GC | LK, MK, GK | KF, KM | NM5, MK5 |
| Medium with Wiper | WMV | WG | MW | WE, WQ | MW | WM, WMX | NM | |
| Roughing | HK, Flat | NR | UN, RP | GC, KH, ZS | GH, RK, GK | KR | RK5, RK7 | |
| S High-Temp Alloys |
Finishing | SF | PP | FN, FS, LS, MS | MQ | FJ | SGF, MF, SF | NF4, NFT, FM5 |
| Medium | LM, SM | TF, EM-M | MS, MP, UP, P | MS, TK | MJ, MS | SM, QM, SMR, MM | NMT, NMS, MS3 | |
| Roughing | LR | EM-R | MU | GJ | SMR | NRT, NRS | ||